A better way
of testing...

Global suppliers of fire detection test tunnels. Designed and manufactured in the UK

Image is not available
Image is not available
FIREX 2019 IS NEARLY HERE

We'll be showcasing some our latest and never seen before products on stand FX925

Image is not available
previous arrow
next arrow
Slider

2000 series laboratory fire detector test tunnels are full size, floor-standing pieces of laboratory equipment. They are mainly intended for type approval testing to EN14604, EN54-7 and EN54-5, but are also ideal for fire detector R&D. The duct size permits the capability (with optional accessories) to carry out the high airspeed (gusting) type test for ionisation smoke detectors, and the high luminance (dazzle) type test for optical smoke detectors.


They are supplied in two main sections, but are not difficult to assemble on site. The PC base unit is pre-configured, and most of the wiring is already in place on the tunnel. Clear instructions (and support) are provided, making it possible to start testing without one of our specialists having to be present.


• Capable of carrying out full range of tunnel tests to EN standards
• Ideal for test laboratories and fire detector R&D
• Ability to test to EN54-7, EN54-29, EN14604 and EN54-5
• Comprehensive technical support
• Additional training from AW Technology available
• Air flow deflector funnel available for high airspeed tests
• Full size dazzle rig available for testing optical detectors

7792
7799
7802
7833
7837
7846
7849
7888
7903

 

The following variants are available in the 2000 series:

 

2200 Smoke Detector Test Tunnel: Designed for testing to EN54-7 and EN14604 over an operating temperature range from room temperature to 55°C.

2400 Combined Smoke / Heat Detector Test Tunnel: This is designed for testing to EN54-7 and EN14604 from room temperature to 55°C, and to EN54-5 with a starting temperature range from 25°C to 80°C. It is capable of carrying out testing for grades A1 to C to EN54-5, including tests from the maximum application temperature for grade C.

2700 Heat Detector Test Tunnel with Cooling: designed for testing to EN54-5 with a starting temperature range from 5°C to 55°C; capable of carrying out testing for grades A1 to C to EN54-5, including tests for suffix R detectors and tests from the maximum application temperature (80°C) for grade C.

2800 Combined Smoke / Heat Detector Test Tunnel with Cooling: Designed for testing to EN54-7 and EN14604 from 0°C to 550°C, and to EN54-5 with a starting temperature range from 5°C to 55°C (as 2700).

The following additional options are available for the 2000 series:

2001 Spare hatch with fixed mounting plate for up to 6 detectors
2003 Hatch with rotating detector mount for directional dependence testing, or for tests at a selected orientation
2004 Spare rotating detector mount (for use with hatch 2003)
2006 Airspeed meter (‘anemometer’) with analogue output integrated with the software
2007 Interface and mount for MIC (standard reference for ionisation detectors)
2008 Optical scatter smoke sensor and software extension to enable simultaneous optical smoke and heat ramp testing (for use with 2800).
2009 Dazzle test rig for high luminance type testing of optical smoke detectors
2010 Airflow deflector funnel for false alarm testing on ionisation detectors to EN54-7 at 5ms-1 and 10ms-1
2011 Hatch and motorised rotating detector mount with software control

 

The overall mechanical parameters are as follows.

Overall size of tunnel: 3.15m long * 0.86m wide * 1.60m high
Internal cross section of duct: 470mm wide by 370mm high
Working volume cross section for smoke detectors: 350mm * 250mm
Working volume cross section for heat detectors: 350mm * 100mm
Extract via 150mm diameter flexible duct (requires a back draught shutter)
Size of cooling unit supplied with 2700 and 2800: 0.9m long * 0.78m wide * 1.15m high.

 

  • 05a
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 18
  • 19
  • 2
  • 20
  • 21
  • 22
  • 23
  • 24
  • 26
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
SPEAK TO ONE OF
OUR EXPERT
ADVISORS

For more information about our range of test tunnels please click below

Slider

Latest News

AW Technology to exhibit at prestigious FIREX International 2019

AW Technology to exhibit at prestigious FIREX International 2019

AW Technology are delighted to announce that their attendance at FIREX International Exhibition 2019. The event runs from 18-20 June at the world renowned ExCel Centre in the heart of London.

Read more

Business development the key for AW Technology with Russia the destination

Business development the key for AW Technology with Russia the destination

AW Technology has a proud history of working on an international scale to deliver world-class technology to the fire protection and alarm industry.

Read more

AW Technology announce new organisational structure

AW Technology announce new organisational structure

AW Technology are delighted to announce a new organisational structure as the business undertakes an exciting new chapter in its history.

Read more

About Us

AW Technology is the leading independent provider of technology to the fire detection and alarm industry. We are based in the United Kingdom, but we operate worldwide.

Our main services are R&D, technical consultancy and the supply of specialist test equipment.

Follow on Twitter

💬 The AW technology detector test tunnels are the result of over 25 years of designing and operating this type of e… https://t.co/H1JdEcAYgF
Discover more about the expertise of AW Technology and our core business philosophy, by visiting our website. 👉… https://t.co/ALgzmQ5H8P

Contact Us

AW Technology Ltd
Nevett House, West Street, Earl Shilton
 Leicestershire, LE9 7EJ
United Kingdom

Tel: +44 (0)1455 841116
Fax: +44 (0)1455 841118